Professional manufacturer of automotive stamping die

Many of the most rigid car body panels are made using stamping dies. As a leading designer and manufacturer of tools and dies in China, we can develop, run and sell auto dies that produce a number of car parts, including cowl panels, hoods, trunks, pillars, roofs, floor pans, bumper covers and more. We have built our reputation through designing, machining and building accurate stamping dies that met customer requirements and operate efficiently. We supply draw dies, blanking dies, cam trim dies and others to car manufacturers, dealerships, and auto part suppliers. If we don't carry the right product in stock, we can also customize machines to meet special die requirements.

Mould We Made
    1. Stamping Die for Body Side Panel

      Draw die is a unique unit that allows the blank to be drawn as a complete piece, rather than in various sections. This particular die is a showcase on our own technical tooling strength.

    1. Stamping Die for Cowl Panel

      Cowl panel is fit under the car hood, and attached to the floor pan and windshield pillars. Common traits of the cowl include a complex profile and multiple holes through which the throttle cable, tension rod and pipeline may pass.

    1. Stamping Die for Car Fender

      Draw die that we produce stretches a plat panel into a 3D shape in a fast and precise manner. Different materials can be used to construct the upper and lower dies, and the blank holder. Below, we have listed several types.

    1. Stamping Die for Car Door Exterior Panel

      Stamping dies for car door exterior panels is a key part of car production, and often takes the longest cycle time. Advanced drawing processes also save raw material, improve production efficiency and reduce manufacturing costs.

    1. Stamping Die for Car Door Panel

      Auto die is made from welded plates that are twice as thick, and involve different processes, including drawing, trimming, piercing, flanging. Both the driver and passenger side car door panels can be made in one stamping die simultaneously, saving tooling costs.

    1. Stamping Die for Car Hood / Bonnet

      Deep draw die can achieve great depth while ensuring the rigidity of the finished drawn parts. A unique knock-out rod design eliminates the need to adjust the knock out rod of the stamping press, making installation easier.

    1. Stamping Die for Car Roof

      A unique selling point of the draw die is the pressure pad, which comes with a sensor to locate and hold down metal blanks on the die shoe. An advanced knock out rod, also known as an ejector pin, push finished work pieces out of the die, preventing improper installation.

    1. Stamping Die for Frame Rails

      Frame rails are critical parts to a car, and does the heavy lifting of the vehicle. Frame rails need to be rigid and accurate to fit seamlessly with other parts of the car. Stamping die for frame rails includes a great rigidity, accuracy, thermal stability and toughness.